No matter what the installation of products, there are some of their own matters for attention, color steel pressure plate is no exception, today small make up for you to introduce the installation of color steel pressure plate matters for attention, want to understand the friends follow the introduction of small make up look at the following article.

1, due to the color steel pressure plate lateral connection has different ways, in order to prevent roof leakage, as far as possible to use the condition of the hidden connection. When roof plate side lap, lap width should be determined according to the shape and specification of pressure type steel plate, generally not less than half wave, lap direction should be consistent with the dominant wind direction. For low corrugated steel plate with wave height less than 70mm, it is not necessary to set a fixed bracket, while for high corrugated steel plate with wave height greater than 70mm, it is better to set a fixed bracket.

2, color steel pressure plate transverse and lateral connection must have reliable connection, in order to prevent the roof plate dislocation and sliding phenomenon.

3, considering that the domestic sealing material performance is poor, easy to age and crack, in the construction, its connection parts as far as possible set in the crest, in order to waterproof.

4. The Angle between the color steel pressure plate web and the horizontal plane of the flange should not be too small.

5. The transverse lap joint of the color steel press plate should be reliably connected with the line, and the lap joint length should meet the specification requirements. The lap joint length should not be less than 350mm, and the lap joint length should not be less than 250mm, and the lap joint should be coated with sealing tape.